Common issues in timing systems
The timing system is a crucial part of the four-stroke internal combustion engine. Its components drive the synchronized rotation of the camshaft(s), ensuring the engine’s inlet and outlet valves open and close at the proper times. This means that if any of the timing components fail, the car will no longer operate properly, which can cause costly damage to the engine.
2023-01-16
Let’s look at some of the common issues that can impact the timing system.
Pulley Misalignment
To be sure the timing works as intended, all pulleys must be perfectly aligned to allow the belt or chain to run evenly in one line. The two most common types of misalignment are:
- Parallel misalignment – When pulleys have been improperly positioned on their shafts, other timing system components, such as belts, can be damaged.
- Angular misalignment – This is due to non-parallel, skewed shafts, which can be a result of incorrect belt tension causing a pulley to tilt.
- Damage due to parallel pulley misalignment
- Damage due to angular pulley misalignment
Incorrect Timing Belt Tension
There are two types of belt tension issues that can impede the performance of the timing system overall:
- If the belt tension is too low, the belt may jump and cause noise and uneven wear. Low tension may also drastically decrease the belt’s life span.
- If the belt tension is too high, the pressure put on the coolant pump bearings and the tensioners becomes excessive, which can cause the coolant pump to fail and the tensioners to break. In extreme cases, the alignment of the pulleys can be distorted and cause further damage to the entire system.
Inadequate Timing Chain Lubrication
Lubrication, like with most parts of the modern combustion engine, is vitally important for the proper functioning and service life of the timing chain system. Oil is used to lubricate the chain and the tensioner that actuates the chain guide, maintaining tension in the system. Inadequate lubrication can result in:
- Polluted oil damaging components
- Excessive movement and wear to components
Damage caused by inadequate chain lubrication
Gear Misalignment
One of the most common installation errors, according to timing chain suppliers, is misalignment. This can be caused by a variety of simple mistakes, including:
- Installing the cam sprocket backwards
- Using the wrong thickness of washer under the sprocket
- Failing to press a cam gear all the way on
- Applying incorrect torque on sprockets without a key slot
Releated
2024-05-28
The braking system is one of the most critical components of a vehicle and has a direct impact on safety. Among the various elements within this system, brake pads are crucial. They ensure that the vehicle stops safely and effectively, making the choice of high-quality pads essential. With more than a century of experience, SKF excels in the development of OE and Aftermarket solutions, including brake rotors with integrated bearings, and offers nearly 900 different brake pad sets for different applications.
2023-01-16
We are used to driving our cars with the only concern being when we we need to schedule regular maintenance, but there are some dangerous issues we can avert from happening just by being aware of some not-so-subtle symptoms.
2023-01-16
For a steer axle with a 12,000-lb. rating, commonly-accepted pressure is 110 psi, and most drivers assume 85 psi is okay. But for every 10% of underinflation, you’re looking at a 1% reduction in fuel economy. Multiply that by the miles you travel in a year and you can expect:
2023-01-16
The wheel bearings on your car can last a lifetime or may not last very long. It all depends on several aspects that we will discuss below. Before talking about replacing wheel bearing, let’s take a quick look at what can cause it to fail.
2023-01-16
The main function of rear suspension (and the front one) is to keep the cars main body from touching the ground and maintaining the wheels on the road. Another function is to enhance the stability on turns and to make the ride more comfortable.
2023-01-16
First, we need to know what these two different mechanisms do for our car. It’s simple, they both perform the same function which is to synchronize the rotation of the crankshaft and the camshaft(s) so that the engine's valves open and close at the proper time. They both operate in the same way and the only difference is their shape and the materials they are made of. The question is, which is better?
2023-01-16
In the engine, what allows the correct synchronization between the crankshaft and the camshaft is the timing system. This movement is produced by one of two elements: a timing belt or a timing chain. In this article, we tell you which components are included in the SKF timing belt kit.
2023-01-16
How to grease your vehicle's wheel bearings and which lubricant should be used? SKF has some tips for you on how to take care of your bearings.
2023-01-16
It is not necessary to replace both at the same time, however, it is highly recommended due to a high risk of engine damage. All parts of the synchronous drive have the same mileage and wear. If one of the parts is not replaced and loaded again by the timing belt adjustment, this can lead to a failure after a short time. Also, this could save money in the long run as the mechanic only has to do the work to get to the synchronous drive once.